Back to top

Waterproofing Chemicals

Here we offer all types of waterproofing chemicals under one roof. Ranging from additives, chemicals, coatings to compounds, insulating primers and membranes, all the variety is manufactured by us under the brand DUBOND. Products offered here can also be availed in the powder and strip form. The purpose of these chemicals is to seal porous surface so that fungus and algae are avoided. The waterproofing chemicals are ideal for surfaces such as RCC, bricks, zinc, aluminum, asbestos and others. These chemicals are also used to repair the damaged bitumen felts.
Product Image (55)

Exterior Waterproofing Coatings

Price: 2750 INR

Exterior Waterproofing Coatings comprises of alkali breathable high-performance resin. These are super waterproof resistance coatings. Best known among clients for their superior resistance to alkali mould-proof and strong adhesion performance, these coatings prevent the penetration of alkaline substances inside the wall. This in result stops the yellowing of metope and paint film from falling out. It has strong weathering resistance ability that makes it highly protected from color fading and paint cracking off.

Product Image (82)

Epoxy Waterproofing Coatings

Price: 9200 INR

Our Epoxy Waterproofing Coatings are considered as the best options for their excellent resistance against water, chemicals and other adverse weather effects. In addition it has excellent elasticity which it maintains for over years even under adverse conditions such as high temperature and external pressure. These coatings are wisely formulated in accordance with industry standards using best quality compounds. It settles down quickly within hours, providing walkable surface easily.

Product Image (74)

Waterproofing Powder

Price: 2650 INR

Waterproofing Powder has extensive application in varied areas such as balconies, roof slabs, bathrooms and basements. Composed of waterproofing additives, this power is dispersed in inert fine filler. It efficiently makes the concrete cohesive and reduces porosity along with improvement in water tightness. The product is chloride free and hence no risk of corrosion formation in reinforcement bars. Waterproof Coating is highly acclaimed for its compatibility with all types & grades of cements.

Product Image (75)

Polymeric Waterproofing

Price: 3095 INR

Polymeric Waterproofing product is available for clients in different versions of high as well as low temperature applications. The waterproofing product is highly flexible and versatile bituminous membrane. Suitable for use in various residential and commercial constructions, it provides complete protection against damaging moisture migration and the infiltration of free water. In addition, this waterproofing solution also offers a quick and easy-to-apply system for maximum productivity.

Product Image (57)

Waterproofing Membrane

Price: 1000 INR

Prior to final dispatch in market, this Waterproofing Membrane is stringently tested on various standard quality parameters by experts. It is best known among clients for its special membrane-to-membrane adhesion that provides additional overlap security. UV stable in nature, this membrane improves the tensile and flexural strength of mortar. In addition to waterproofing, this membrane is also applicable in construction industry as bonding agent for old and new concrete or masonry structures.

Product Image (56)

Waterproofing Strip

Waterproofing Strip is high in demand for sealing joints in underground precast elements, tunnel segments, horizontal and vertical construction joints and concrete to steel joints. This is an expansive hydrophilic strip made from a combination of an elastomer and a resin. The strip gets swelled up when comes in contact with water. IN result, it builds up a waterproofing pressure inside the joint in order to seal the joint against water leaks.

Product Image (54)

Terrace Waterproofing Coatings

Price: 2485 INR

Wisely formulated in complete accordance with industry standards, these Terrace Waterproofing Coatings avoids sheaths or joints in the most delicate areas. It is best known for forming a continuous coating in the areas subjected to high structural stress. The coating shows an excellent resistance against UV light and adverse weather conditions while maintaining its original elasticity. The impermeability and surface adherence strength of the coating remains unaffected even in adverse conditions.

Product Image (53)

Waterproofing Insulating Primer

Price: 4040 INR
  • Application:Concrete surfaces should be sound and clean, free from oil, grease, cement laitance & loosely adhering particles. Absorbent surfaces should be saturated thoroughly with water but without showing any puddle on their surfaces.the single pack of Hydroprime compound (water based synthetic resin micro emulsion) should be mixed with water in the ratio of 1 : 1 ( 1 liter of hydroprime : 1 liters of water ). Minimum 2 (two) coats are recommended by brush application for best results of the product.
  • Color:green
  • Physical State:Liquid
Product Image (52)

Waterproofing Compound

Our offered Waterproofing Compound provides permanent waterproofing solution in the surface yet allowing it to breathe. It finds extensive applications in cement block, concrete floors, walls and floors of domestic, commercial & civil constructions, structural floors, foundation walls, warehouses, swimming pools, storage tanks, tunnels and dams. The compound penetrates deep into the surface, resulting in a permanent integral part of the surface. It does not peel or blister off as compared to normal coatings.

Product Image (51)

Hydro Crete Waterproofing Additive

Price: 3095 INR
  • Application:Concrete surfaces should be sound and clean, free from oil, grease, cement laitance & loosely adhering particles. Absorbent surfaces should be saturated thoroughly with water but without showing any puddle on their surfaces.
  • Physical State:Liquid
  • Color:Milky White
Product Image (50)

Basement Waterproofing Compound

Price: 3520 INR
  • Physical State:Powder
  • Color:white
  • Application:Ensure that structure is sound and free from dirt, soil, oil release agents, laitance and any other foreign materials which may impair the bond, penetration and/ or the overall performance of Hydro Coat Osmocem. In case of smooth concrete surface, the surface should be water cleaned / sand blasted or acid etched to ensure that the concrete surface has an open capillary system.Ensure to fill cracks / honeycombs / holes / faulty construction joints with Dubond Acrylic Crack Filler and allow it to touch dry. Ensure to dampen surface lightly before applying Hydro Coat Osmocem to facilitate maximum chemical penetration. It must be applied with a rigid brush in fibre or with a spreader, depending on the type of work required (simple waterproofing or simultaneous levelling of the substrate). Make adjustments to the mixing water in order to obtain a consistency suitable for the required application. In case of highly porous, damaged, efflorescence substrate, it is recommanded to use Hydroprime as a first coat to facilitate the maximum chemical penetration. Add 4 – 4.5 Ltrs of water with 10 Kgs of Hydro Coat osmocem , stir the mix thoroughly to form slurry and apply, in specified quantities, by stiff bristle brush or squeegee. Ensure to prepare only as much amount of slurry as can be applied during its pot time i.e. 20 minutes. ( can add or reduce water as per the site conditions ) Ensure the desired thickness in each coat of application. Apply the first coat on a substrate moistened to saturation point but without the presence of stagnant water. Once the product has hardened, apply a second coat (normally 4-6 hours, depending on climatic conditions and the degree of absorbency of the substrate. In any case do not apply the second coat after a period of 24 hours). Apply the second coat in a criss-cross direction as compared with the first coat. The layers of hydro coat Osmocem must be applied with great care to ensure complete coverage of surfaces and proper connection of the walls and horizontal surfaces by means of connection shells.For horizontal surface apply in one coat while for vertical surface apply in two coats. Apply second coat when first coat is touchdry. Glass fiber mesh can be used as a sandwitch between the layers of coat as reinforcement system which ensures tight bonding to restrain from the hydrostatic preassure. Light spray of water may be required between coats in hot/ dry climates. In extreme hot weather and very low humidity conditions, ensure curing as soon as the Hydro Coat Osmocem coating has hardened sufficiently. After 36 – 48 hours of the application of 2 coats ponding can be done to the satisfaction of the engineer for the final testing of waterproofing. Recommended for 3 to 4 days.
Product Image (49)

Terrace Waterproofing

Price: 2485 INR
  • Application:Water retaining structures and containment walls. Walls & Floors of bathroom and toilets or places where there is a lot of moisture before the laying of ceramic wall tiles. Basements, tunnels, machine pits, reservoirs, concrete walls , terraces, balconies, prior to fixing ceramic tiles particularly suitable for raised floors. Restoring the waterproofing properties to old terraces without demolishing the existing floor surface. Leveling cracked plaster or concrete.
  • Physical State:Powder
  • Color:white
Product Image (48)

HydroShield Waterproofing

Price: 2750 INR
  • Application:Visible cracks must be sealed by Du Flex PS 600, polysulphide, or polyurethane sealant and primer . This sealants are not attacked by the repellent Hydro shield. Brush application is the simplest method Flat brushes or rollers can be used for application, while solution is applied, as the success or failure of such treatment depends on this factor. Surface penetration is most important step before application to get best results and avoid failure The surface must be free from any loose materials, crumbling powdery encrusted walls,fungus, moss, oil, grease and mould release agents. Clean the surface using scrappers and wire brushes. Then clean the walls with high pressure water, wait for 2 days for the surface to dry The walls must be dry before the application. Use of acidic and alkaline chemicals, detergents, cationic surfactants should be avoided It is advisable to wait for 28 days for curing the fresh masonary / new concrete
  • Color:white
  • Physical State:Liquid
Product Image (46)

Waterproofing Coating

Price: 2650 INR

Our stock of Waterproofing Coating is flame-proof and non-toxic in nature. Wisely made of high quality and permanently elastic natural materials, it is best known for providing a long-lasting continuous coating. Highly suitable for application on a large number of construction materials such as sheaths, asphalt coatings, cement and tiles, this coating maintains high elasticity even at low temperatures. Our clients can get this coating in moisture proof packaging at highly competitive price.

Product Image (45)

Foundation Waterproofing Chemicals

Price: 2800 INR
  • Application:Hydro lastik is applied with a fibre type brush or by trowel when a smooth finish is required. For large areas Hydro Lastik can also be sprayed, being the recommended nozzle size 3-4 mm and spraying pressure between 3.5 and 5.0 bar. When sprayed, it is recommended to finish the fresh coat with a trowel to make sure that the whole surface is covered completely. Apply two coats, using 1 – 1.5 kg/m² Hydro lastik per coat and allow a minimum of 16 hours and a maximum of 3 days between applications. Prior to application thoroughly wash down and saturate the surface, but do not leave free standing water. Thickness per layer should be 1 mm approximately, thereby being important to avoid very thin application or, on the opposite, a much thicker one. In those areas such as fissures, concrete joints and active cracks, once repaired and sealed. Place the mesh on a first coat of Hydro lastik with at least 20 cm wide of strip, and then apply a second coat of Hydro Lastik. Application conditions Optimum application temperature is between 10˚C to 25˚C. Do not apply below 5˚C or if lower temperatures are expected within the following 24 hours after application. Do not apply on frozen surfaces or if rain is expected 24 hours after application. Protect against quick drying by winds and direct sunlight with high temperatures, by fog spraying with water for two hours after application. Curing time required to put the product into service or to immerse it in water will depend on temperature and relative humidity conditions on site. Conditions in the range of 20˚C and 50% R.H will require a minimum of 14 days to ensure that the product has cured enough to be in permanent contact with water. Applications made at lower temperatures or sites without ventilation will require longer curing periods. After curing, wash the surface of Hydro Lastik with water before putting into service in permanent contact with water.
  • Physical State:Powder
  • Color:white
Product Image (43)

HydroShield S Waterproofing

Price: 2750 INR
  • Physical State:Liquid
  • Color:colourless
  • Application:Visible cracks must be sealed by Du Flex PS 600, polysulphide, or polyurethane sealant and primer. This sealants are not attacked by the repellent Hydro shield. Brush application is the simplest method Flat brushes or rollers can be used for application, while solution is applied, as the success or failure of such treatment depends on this factor. Surface penetration is most important step before application to get best results and avoid failure. The surface must be free from any loose materials, crumbling powdery encrusted walls, fungus, moss, oil, grease and mould release agents. Clean the surface using scrappers and wire brushes. Then clean the walls with high pressure water, wait for 2 days for the surface to dry. The walls must be dry before the application. Use of acidic and alkaline chemicals, detergents,cationic surfactants should be avoided. It is advisable to wait for 28 days for curing the fresh masonary / new concrete
Product Image (44)

SBR Waterproofing Chemicals

Price: 850 INR
  • Color:Milky White
  • Physical State:Liquid
  • Application:The base must be clean and free from loose particles. Unsound areas should be removed until sound concrete is located. Any cracks, pot holes etc should be properly sealed and cured. The surface to be treated should be free from all coatings dust and unsound concrete toppings. The unsound parts should be chipped off to arrive at sound surface. Smooth substrates must be mechanically roughened e.g. by scrabbling, needle gun or grit blasting to provide an adequate key. Corroded reinforcing steel should be exposed around its full circumference and cleaned to remove all loose scale and corrosion deposits. It is always preferably to clean the steel to a bright condition. Use of emery cloth, grit or sand blasting, or Dubond Rust Remover / Dubond ZRP is recommended.
Product Image (19)

Hydro Lastik Waterproofing Chemicals

Price: 2800 INR
  • Application:Hydro lastik is applied with a fibre type brush or by trowel when a smooth finish is required. For large areas Hydro Lastik can also be sprayed, being the recommended nozzle size 3-4 mm and spraying pressure between 3.5 and 5.0 bar. When sprayed, it is recommended to finish the fresh coat with a trowel to make sure that the whole surface is covered completely.Applytwo coats, using 1 – 1.5 kg/m² Hydro lastik per coat and allow a minimum of 16 hours and a maximum of 3 days between applications. Prior to application thoroughly wash down and saturate the surface, but do not leave free standing water. Thickness per layer should be 1 mm approximately, thereby being important to avoid very thin application or, on the opposite, a much thicker one. In those areas such as fissures, concrete joints and active cracks, once repaired and sealed. Place the mesh on a first coat of Hydro lastik with at least 20 cm wide of strip, and then apply a second coat of Hydro Lastik. Application conditions Optimum application temperature is between 10˚C to 25˚C. Do not apply below 5˚C or if lower temperatures are expected within the following 24 hours after application. Do not apply on frozen surfaces or if rain is expected 24 hours after application. Protect against quick drying by winds and direct sunlight with high temperatures, by fog spraying with water for two hours after application.Curing time required to put the product into service or to immerse it in water will depend on temperature and relative humidity conditions on site. Conditions in the range of 20˚C and 50% R.H will require a minimum of 14 days to ensure that the product has cured enough to be in permanent contact with water. Applications made at lower temperatures or sites without ventilation will require longer curing periods. After curing, wash the surface of Hydro Lastik with water before putting into service in permanent contact with water.
  • Color:white
  • Physical State:Powder
Product Image (17)

HydroCoat Waterproofing Coating

Price: 2485 INR
  • Application:Water retaining structures and containment walls. Walls & Floors of bathroom and toilets or places where there is a lot of moisture before the laying of ceramic wall tiles. Basements, tunnels, machine pits, reservoirs, concrete walls , terraces, balconies, prior to fixing ceramic tiles particularly suitable for raised floors. Restoring the waterproofing properties to old terraces without demolishing the existing floor surface. Leveling cracked plaster or concrete.
  • Physical State:Powder
  • Color:white
Product Image (20)

Hydrobuild LW Waterproofing Compound

Price: 590 INR
  • Color:Wine red
  • Physical State:Liquid
  • Application:It is used in tanks, reservoirs, foundations, swimming pools, terraces, bathroom walls, basements sewers, external plasters.
X