Back to top

Floor Sealers

Make your floors more strong and durable by using our high quality Floor Sealers which are available in different types. They are chemical solutions which are applied to different types of floor to protect them against damage or stains. The offered products have accurate composition and high effectiveness. Besides, they provide the natural look, and are basically used to seal the surfaces. The Floor Sealers are available in safe and efficient packaging options in order to maintain their purity and can be availed from us affordable prices.
Product Image (104)

Stone Sealer

Price: 650 INR
  • Physical State:Liquid
  • Application:Apply on the dry and clean surface a thin even layer of STONE SEAL by means of a brush, lambs wool or low pressure sprayer. Two coats wet are required only on the most absorbing materials. Allow to dry completely. For polished materials, remove the dull patina with steel wool pad or with a cloth slightly damp with STONE SEAL. For large surfaces, use a floor machine with red pad or fine steel wool pad. The surface can be opened to foot traffic 3-6 hours after treatment; however it must not be wet for the next 24 hours, i.e. until the product has completely hardened.
  • Color:Transparent
Product Image (101)

Tile Stain Sealer

Price: 1600 INR
  • Physical State:Liquid
  • Color:Transparent
  • Application:Apply using a brush, roller, cloth, sponge or sprayer. Buffs dry and excess sealer that does not penetrate within 3 to 5 minutes with an absorbent trowel or carpet bonnet. Highly porous surfaces may require a second or third application to give full protection. wait a minimum of 1 hour between applications. May be opened for foot traffic in 2 hours. Achieves a full cure in 24 hours.
Product Image (99)

Grout Sealer

  • Color:Transparent
  • Application:Grout joints must be clean dry and free of existing sealers and coating to ensure good bonding. Apply 2 coats with a soft-bristle paint brush. Allow a minimum of 30 minutes drying times between coats. Sealed area should be kept dry for 12 hours. Achieves a full cure in 24 hours. Use cotton or paper towels, polish dry any sealer remaining on the tile and grout within 3 to 5 minutes of application. Do not allow sealer to come in contact with any non-recommended surface.
  • Physical State:Liquid
Product Image (105)

Floor Tile Sealers

  • Color:Transparent
  • Physical State:Liquid
Product Image (102)

Porcelain Floor Sealer

Price: 220 INR
  • Application:Apply on the surface a thin layer of product with a soft bristle brush or with a lambs wool and let it dry 6-8 hours. take the residue away by means of a fine pad polishing machine.
  • Color:colourless
  • Physical State:Liquid
Product Image (100)

Concrete Floor Sealers

Price: 5000 INR
  • Physical State:Liquid
  • Application:Apply using a brush, roller, cloth, sponge or sprayer. Buffs dry any excess sealer that does not penetrate within 3 to 5 minutes with an absorbent trowel or carpet bonnet. Highly porous surfaces may require a second or third application to give full protection. Wait a minimum of 1 hour between applications. May be opened for foot traffic in 2 hours. Achieves a full cure in 24 hours.
  • Color:coloureless
Product Image (103)

Porous Substrate Sealer

Price: 800 INR
  • Physical State:Liquid
  • Application:Spread a thin even layer of PORO SEAL by means of a soft brush, or lambs wool or low pressure sprayer. On the most absorbent stones two applications may be required. Wait 2-3 hours between each coat. Surface to be treated has to be completely dry and clean.
  • Color:Transparent
X