Vitrified Tile Adhesive
Product Code : 09
Brand Name : Dubond
- Adhesive Type
- solvent adhesive
- Peak should be applied with a suitable toothed spreader, to be chosen according to the size and characteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spread a fine initial layer, pressing down hard so as to obtain maximum adhesion to the substrate and to regulate water absorption, after which the thickness can be adjusted as required by tilting the spreader at an angle.Spread the adhesive over a surface area which will allow for laying of the surface materials within the indicated open time and check for suitability of the adhesive at regular intervals, the open time may vary considerably during the same operation, depending on various factors such as exposure to sunlight, air currents, absorbency of the substrate, temperature and relative humidity of the atmosphere.Press down each tile to allow for complete, uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic or in outdoor locations, the double-spread technique must be used, to ensure 100% coverage of the rear of the tiles. In general, ceramic tiles do not require preliminary treatment, however these materials should properly anchored to the substrate or which may modify the absorption characteristics of the tiles.
- White & Grey
- Minimum Order Quantity
- Unit of Measure
- 900 INR
- Payment Terms
- Supply Ability
- As per customers requirement Per Day
- Sample Policy
- Contact us for information regarding our sample policy
- Packaging Details
- 20Kg bag
- Main Domestic Market
- All India
- ISO 9001:2008
Vitrified Tile Adhesive
Cementious Adhesive For Tile & Stone Of Any Kind
Dubonds Peak is anti-skid quartz adhesive with high adhesion. It can be used up to 10 mm bed thickness. High dispersion co-polymers hydraulic binders are formulated from only cement clinker in peak that offers rheological mixture for long-lasting stability. It is used for high resistance laying.
Fixing absorbent floor as well as wall tiles in doors and outdoors
Fixing on heating floors and poorly absorbent materials or non-absorbent materials like single-fired tiles, vitrified tiles and refine porcelain stoneware.
Suitable for use when high performances are required, such as tile fixing in
Fixing on top of the old natural stone or ceramic tiles
Indoors, swimming pools or facades.
The tiles can be designed of double fired, cotton, single fired ceramic
- Easy to apply
- Excellent binding ability
- Lower mixing ratio