Basement Waterproofing Compound
Product Code : 50
Brand Name : Dubond
- Ensure that structure is sound and free from dirt, soil, oil release agents, laitance and any other foreign materials which may impair the bond, penetration and/ or the overall performance of Hydro Coat Osmocem. In case of smooth concrete surface, the surface should be water cleaned / sand blasted or acid etched to ensure that the concrete surface has an open capillary system.Ensure to fill cracks / honeycombs / holes / faulty construction joints with Dubond Acrylic Crack Filler and allow it to touch dry. Ensure to dampen surface lightly before applying Hydro Coat Osmocem to facilitate maximum chemical penetration. It must be applied with a rigid brush in fibre or with a spreader, depending on the type of work required (simple waterproofing or simultaneous levelling of the substrate). Make adjustments to the mixing water in order to obtain a consistency suitable for the required application.
In case of highly porous, damaged, efflorescence substrate, it is recommanded to use Hydroprime as a first coat to facilitate the maximum chemical penetration.
Add 4 – 4.5 Ltrs of water with 10 Kgs of Hydro Coat osmocem , stir the mix thoroughly to form slurry and apply, in specified quantities, by stiff bristle brush or squeegee. Ensure to prepare only as much amount of slurry as can be applied during its pot time i.e. 20 minutes. ( can add or reduce water as per the site conditions )
Ensure the desired thickness in each coat of application. Apply the first coat on a substrate moistened to saturation point but without the presence of stagnant water. Once the product has hardened, apply a second coat (normally 4-6 hours, depending on climatic conditions and the degree of absorbency of the substrate. In any case do not apply the second coat after a period of 24 hours). Apply the second coat in a criss-cross direction as compared with the first coat. The layers of hydro coat Osmocem must be applied with great care to ensure complete coverage of surfaces and proper connection of the walls and horizontal surfaces by means of connection shells.For horizontal surface apply in one coat while for vertical surface apply in two coats. Apply second coat when first coat is touchdry. Glass fiber mesh can be used as a sandwitch between the layers of coat as reinforcement system which ensures tight bonding to restrain from the hydrostatic preassure. Light spray of water may be required between coats in hot/ dry climates.
In extreme hot weather and very low humidity conditions, ensure curing as soon as the Hydro Coat Osmocem coating has hardened sufficiently. After 36 – 48 hours of the application of 2 coats ponding can be done to the satisfaction of the engineer for the final testing of waterproofing. Recommended for 3 to 4 days.
- Minimum Order Quantity
- Unit of Measure
- 3520 INR
- Payment Terms
- Packaging Details
- 1Kg, 5Kg & 10Kg Bag
- Main Domestic Market
- All India
In our wide range of products, we are affianced in offering high quality Basement Waterproofing Compound. Our offered compound is used in the permanently blocked to the passage of water. This compound is processed by our skilled professionals using the finest quality chemical compounds. We offer this Basement Waterproofing Compound in different packaging options to meet the requirements of the clients.
- High in bonding strength
- Water resistant
- Easy to apply